Recently, we obtained a group of application drawings of the new Great Wall pickup on the website of the Ministry of industry and information technology. From the picture, this pickup is the model that exposed spy photos not long ago. The declaration information shows that the body size and wheelbase of the vehicle are different from those of the cash Great Wall POER. The power part adopts the 2.0T gasoline engine of gw4c20b and has an off-road appearance kit. The official did not disclose the information about the car, so it is not sure whether the new pickup is a medium-term modification of the cash Great Wall POER or a new product.

According to the 347th new car announcement of the Ministry of industry and information technology of the people’s Republic of China, the new high-end pickup truck of the Great Wall POER, which recently exposed the spy photos of the way out test, has been officially exposed. The front face of the new car adopts the same headlamp group and large-size chrome plated medium mesh grille as the tank 600. The front bumper is speculated to be a high-strength iron component suitable for the field environment, Two distinct red towbars can be seen under the bumper. The new model of the Great Wall POER shown in the application drawing of the Ministry of industry and information technology also has a water hose, a wide black off-road wheel eyebrow, an off-road gantry, and a black exhaust cover similar to cat back exhaust. The author speculates that the new high-end model of the Great Wall POER in the future will also be divided into off-road version, passenger version and other different configuration versions. The model shown in the figure should be an off-road version.

The body size of the new high-end model of Great Wall POER is 5465 / 5496 × one thousand nine hundred and ninety-two × 1960mm, container size 1500 × one thousand five hundred and twenty × 480mm, wheelbase of 3350mm, total mass of 3140kg, curb weight of 2515kg, rated load mass of 300kg, approach angle / departure angle of 30 ° / 28 °, tire specifications of 265 / 65r18 and lt265 / 65r18. According to the declaration information, the overall size of the new high-end pickup truck of Great Wall POER is larger than any original mass-produced vehicle of Great Wall POER currently on sale, and the approach angle and departure angle exceed the off-road pickup truck of Great Wall POER, which further confirms the author’s above speculation that the vehicle is an off-road version. According to the product positioning, it can be inferred that the positioning of this car in the Great Wall POER product pedigree should be similar to that of Toyota Tacoma in Toyota pickup, medium-sized, large-size and high-end pickup.

In terms of appearance, the new Great Wall pickup truck is basically consistent with the hand-painted hypothetical drawing exposed not long ago. The front is equipped with a huge hexagonal air inlet grille and is decorated with thick chrome plating. The logo of the central Great Wall POER is also very large, and the front of the engine compartment is also equipped with the style of air inlet. Compared with the cash Great Wall POER, the headlights on both sides are wider up and down, more imposing, and there is an LED light band inside. The bumper is painted in black, and the red trailer hitch is very eye-catching, with fog lamp areas on both sides. According to the declaration information, the vehicle can also be equipped with a front winch.

The rear of the vehicle is also different from the cash Great Wall POER. Two waist lines are added to the upper and lower parts of the tailgate, which is more three-dimensional and beautiful. Different from the hypothetical figure, the rear bumper still adopts the conventional style, with pedals and license plates in the middle. The outline of the tail lamp is also more three-dimensional, and there are many styles to choose from. In addition, the whole vehicle is also equipped with wading throat, container roll cage with high-level brake light, wide black wheel eyebrows, etc. the skylight is also one of the configuration options.

In terms of parameters, the declaration information shows that the parameters of the car are quite different from those of the cash Great Wall POER. The length, width and height are 5465 (5496) * 1992 * 1960mm, the wheelbase is 3350mm (the wheelbase of the cash Great Wall POER is 3230mm and 3470mm), and the length, width and height of the container is 1500 * 1520 * 480mm (the length, width and height of the cash Great Wall POER is 1520 / 1760 * 1520 * 540 / 538mm). The rated load mass is 300kg, the tire specification is 265 / 65r18, the front wheel distance is 1626mm, the rear wheel distance is 1635mm, the approach angle / departure angle is 30 / 28 degrees, and the rear is still a coil spring multi link suspension structure. In terms of power, the new Great Wall pickup truck will be equipped with a 2.0T gasoline engine code named gw4c20b, with a maximum power of 165KW (140kW for the cash Great Wall POER). There are also different adjustments in parameters, and the torque is expected to be different from the cash Great Wall POER.

In other aspects, the new car can be equipped with skylight, rear combination lamp, side step, front winch, etc vehicle mounted device, etc. according to the number of leaf springs displayed in the application information of the Ministry of industry and information technology, the new car will still adopt multi link rear suspension, continuing the high-end pickup positioning of the Great Wall POER. In terms of power, the power declared by the Ministry of industry and information technology is not the Great Wall 3.0T power system previously speculated, but the same 2.0T gw4c20b high-power version as the single row pickup gun, with a maximum power of 160kW and a peak torque of 380n · m. It is speculated that the transmission system will still match the ZF 8at gearbox, and the fuel consumption declared by the Ministry of industry and information technology is 11.6l per 100km.